DJI Mavic Mini 3 Pro – NO REMOTE


The Mini 3 Pro will sport a new 1/1.3″ (0.77 inch) 48MP (true 12MP) f1.7 Quad Bayer CMOS sensor which will record video at up to 4k 60fps with HDR (High Dynamic Range).


Delivery 2-4 working days

Terms & Conditions Apply, Pricing and Availablity subject to change without notice.

Whatsapp Us Now

072 011 8455

Email Us Now

Pay Online Safely

Available on backorder


What’s in the box

  • 1 x DJI Mini 3 Pro Intelligent Flight Battery
  • 1 x Pair of Spare Propellers
  • 1 x Gimbal Protector
  • 1 x Type C Data Cable
  • 1 x Screwdriver
  • 6 x Spare Screws

*Please note that this drone does not come with a DJI Remote Controller. In order to operate this drone, you will need to already own a DJI Remote controller from the DJI Mini 2, DJI Mavic Air 2, DJI Mavic Air 2S or the DJI Mavic 3.


  • DJI Mini 3 Pro
  • Under 250g
  • 1/1.3″ (0.77″) 48MP f1.7 Quad Bayer CMOS Sensor
  • 4K 60 fps with HDR
  • 1080p 120fps
  • Horizontal and Fully Vertical camera orientations
  • Obstacle Avoidance Sensors
  • Intelligent Flight Modes
  • Flight times of up to 47 minutes (with the optional larger batter) or 25-30 minutes with the standard supplied batteries.
  • Maximum flight speed of 16 m/s
  • Maximum flight height of 4000m
  • Maximum horizontal range of 8KM

The Camera

The Mini 2 came with a 1/2.3″ 12MP f2.8 CMOS sensor which was capable of recording video at up to 4K 30fps and capturing RAW photos. In many ways it is still a fantastic little sensor capable of taking fantastic RAW photos with enough dynamic range to create some amazing imagery providing you’re careful with your exposure.

The Mini 3 Pro will sport a new 1/1.3″ (0.77 inch) 48MP (true 12MP) f1.7 Quad Bayer CMOS sensor which will record video at up to 4k 60fps with HDR (High Dynamic Range). The sensor is over twice the size of the Mini 2which lends itself to better low light captures helped by the larger fixed f1.7 aperture.  

The most important aspect of this new sensor is the pixel size. It has been confirmed that each pixel will be same size as on the fantastic Mavic Air 2S measuring in at 2.4µm. Though the Air 2S comes with a larger true 20MP 1″ Sensor. This is still a huge upgrade from the Mini 2 and huge technical achievement given that all of this has to be contained within a drone weighing less than 250g. 

The Mini 3 Pro will be able to capture video in DJI’s colour profile D-Cinelike. This flatter colour profile will allow users to have better control over the colour grading process when editing as well as potentially finer control over shadows and highlights compared to the baked in ‘Normal’ profiles.

The Autel Nano+ is currently the Mini 3’s only comparable alternative which comes with a slightly bigger 1/1.28″ f1.9 and highly regarded RYYB sensor.

The camera will also come with the ability to rotate 180° on the vertical axis to allow the camera to point completely upwards. It will also be able to rotate the camera to a vertical aspect which will make it easier to capture vertical panoramas with a reduced reliance on stitching algorithms from traditional horizontal panoramas. This will likely also lend itself well to capturing native 9:16 content for pilots that like to share their content to social media platforms such as TikTok and Instagram.

Obstacle Avoidance Sensors

The DJI Mini 3 Pro comes with built in obstacle avoidance sensors, unlike the Mini 2, which didn’t have any at all. There will be 2 large front sensors, 2 sensors pointing backwards and 2 downward facing sensors. This will give it the ability to detect obstacles from the front, back and below and will work in tandem with APAS 4.0 to detect and dynamically avoid obstacles. This system has proven itself to work extremely well on the Air 2S and the Mavic 3 so there is no reason why this won’t translate equally well to the Mini 3 Pro.

The new sensors also means that some of the more complicated autonomous flight modes such as Active Track, POI, Master Shots and Spotlight will now be available.

Increased Flight Times

The batteries for the Mini 3 have a larger capacity and will allow a flight time of up to 47 minutes. However, it is expected that this flight time is based on a larger battery type that DJI will offer as a separate purchase from the standard batteries that ship with the Mini 3. The standard smaller batteries will maintain its weight class of sub-250g but it is expected that the larger batteries will tip the scale over this figure.

The Mini 3 Pro’s total redesign will presumably allow better aerodynamics compared to the mini 2 (thanks in part to its larger propellers) so even with the standard batteries you can expect a flight time of between 25-30 minutes.

Additional information

Weight 2 kg
Dimensions 42 × 32 × 8 cm